Install Mikrotik With PC Through Sricpt

MikroTik RouterOS ™ is the operating system and which can be used to make computer

become a reliable network router, include the full feature for network and wireless.
Then in extrack and then burn it to CD ISO file.

1. Install Mikrotik

- Prepare your PC, minimum Pentium I also do not destitute of RAM 64, HD 500 meters or the use of flash memory 64

- On the server / PC must have at least two ethernet, one outward and one more to the local Network

- Source Burn CD to CD-ROM input Mikrotik

- Boot from CDROM

- Follow instructions, use the next-next syndrome and default

- Install the main package, all packets with a better way to mark (mark)

- After all the packages marked for install then press the "I"

- Old Install normally not until 15menit, if more is to fail, repeat the initial step

- Once installed fine, restart your PC will display the login screen

2. Basic setting mikrotik

The initial steps of all the configuration steps are setting mikrotik ip

It aims to be at a remote mikrotik and with Winbox and allows us to

perform various configuration

- Login as admin with the default password is not filled immediately enter

Replace it with your ip address and interface that will be used for remote temporary

Here I will explain using two methods, namely, with the text and Winbox.

I. Step setting Mikrotik TEXT

----------------

Let's start with the assumption that the process has been successfully installed

1. Install - OK

2. Eth1 222.124.xxx.xxx IP Settings (ISP)

command:

ip address add address 222.124.xxx.xxx netmask 255.255.255.xxx interface ether1

IP is a public IP / IP existing Internet connection

3. IP settings eth2 192.168.1.254

command:

ip address add address 192.168.1.254 netmask 255.255.255.0 interface ether2

Local IP is your IP.

Now do ping to and from another computer, after the connect go to step

next, if not repeat from step No. 2.

4. Gateway Settings

command:

ip route add gateway = 222.124.xxx.xxx (from ISP)

5. Settings Primary DNS

command:

ip dns set primary-dns = 203.130.208.18 (ISP)

6. Setting Secondary DNS

command:

ip dns set secondary-dns = 202.134.0.155 (from ISP)

7. Routing settings to eth1 masquerade

command:

ip firewall nat add chain = srcnat action = masquerade out-interface = ether1

For the last did a test ping to the Gateway / to yahoo.com, if connect then you are ready Mikrotik
in use.