Extend USB cable with UTP cable

To use the antenna cans / wajanbolic required USB cable between the long 5 s / d 15 meter. Use a usb extension cable in addition to this more economical price and easy in the process than when using the USB cable Active Extension Cable that are more expensive from a USB WIFI.
Treatment is needed in the supporting equipment such as:
- Cutting tool (knife / scissors).
- Multitester (which use to find out whether or not the usb cable and UTP).
- Solder and tin secukup.
- Solatip to conceal the cable that was disolder.

Process:
Snippet into two equal parts usb cable, and then through both ends according to the color below:
(USB) ... Red (UTP) Orange + White / Orange
(USB) White .....( UTP) White / Green
(USB) Green .....( UTP) Green
(USB) Black ....( UTP) cable UTP All the rest are



Please check one by one USB cable and UTP cable with Multitester is still well connected at both ends when not trying to check where the cable is set to drop out, this is very useful to determine the success in making a USB extension cable. Appropriate solder then wrap the cable over the cable is wrapped with solatif or use paralon pipe size 1 / 2 inch closed meetings that do not leave naked not later entered the water at the time of rain later.

Testing the cable:
Here the authors attempt to use the media as a substitute for flasdisk WIFI USB, connect the other end of the second from one end of the second cable to the PC / Notebook and one to Flashdisk, see if your PC / Notebook can detect a flash, if not try once again check the cable, the cable is already suitable.

@@GOOD LUCK@@