After much controversy reap from the previous post so now we haturkan, the latest version of Senao Engenius EOC in 2610, with upgrading to the latest version of firmware EOC in 2610, then you will find some of the features of the product Wifi origin is Taiwan, also found that in addition to the improvement namely the improvement on the device stability, whereas in the previous firmware found many of the users complain, but in the new 1.0.37 firmware, and not long after followed by the version 1.0.39 is "mild," I make tired-very tired, as I previously .
More brisk again we meet the new facilities that have not been found on the previous firmware 1.0.37, among others, we find:
On the Menu "System Properties", we met Mode: WDS Bridge ", where Senao EOC 2610
This can act as a Repeater, although it is recommended only can communicate with each other device vendors. Stay on the menu, we find the special features of "Super Channel", where this feature is common we see on the device and Mikrotik DD-WRT Lisence, Super Channel with the EOC in 2610 get the "loose" the more channels, ie, there are additional 13 Channel at Frequency 2300 MHz, so useful for instlasi-installation in large cities, where environmental conditions have been solid by the Freq 2.4 GHz, but you must remain vigilant due to the frequency beyond 2.4 GHz Freq should still have a permit license, if the violation can can-you must accompany you "Antasari Azhar" in the House detention.
In the next menu again Pabrik Engenius make surprises, to increase the amount of the SSID that can be "spent" by Engenius EOC 2610 is the radio that berpower max 600mw this issue can be 4 (four) SSID, where each SSID SSID can have a different disparate needs of our fit.
The next Advanced Wireless Settings, new facilities "Channel Bandwidth", in which we can again reduce the amount of its frequency spectrum from 5, 10, and the normal 20 MHz. this feature is also necessary for those who want to minimize the impact of interference, but we kekurangannya is Troughtput akan decreased. This feature was previously to be characteristic of the manufacturer and from Mikrotik Ubiquity. So even though we remain so acungkan a thumb Engenius can provide an alternative for users.
Other features in the "Management", there are additional menu "Diagnostics", which contains two new features of "Ping Test Parameters" and "Traceroute Test Parameters", which was quite helpful to us in evaluating kasil connection.
So with the new features fiur-over presumably be increased EOC 2610 class, though minus the new features, the EOC also has a surplus in 2610, among other advantages, he has facilities HTTP, telnet and SNMP management, Telnet with this feature you can access them through Linux prompt. Mode and then on the Access Points, you can monitor the client MAC Address that is connected with the quality of its RSSI. Excess is the other manufacturer Engenius has stock which is always awake, and we very rarely encountered vacuum Engenius products in stock over time, with different brand Mikrotik, Ubiquity and Finetic when empty stock may take up to many weeks, with 30 years experience to produce , Engenius able to maintain its safety stock.
More brisk again we meet the new facilities that have not been found on the previous firmware 1.0.37, among others, we find:
On the Menu "System Properties", we met Mode: WDS Bridge ", where Senao EOC 2610
This can act as a Repeater, although it is recommended only can communicate with each other device vendors. Stay on the menu, we find the special features of "Super Channel", where this feature is common we see on the device and Mikrotik DD-WRT Lisence, Super Channel with the EOC in 2610 get the "loose" the more channels, ie, there are additional 13 Channel at Frequency 2300 MHz, so useful for instlasi-installation in large cities, where environmental conditions have been solid by the Freq 2.4 GHz, but you must remain vigilant due to the frequency beyond 2.4 GHz Freq should still have a permit license, if the violation can can-you must accompany you "Antasari Azhar" in the House detention.
In the next menu again Pabrik Engenius make surprises, to increase the amount of the SSID that can be "spent" by Engenius EOC 2610 is the radio that berpower max 600mw this issue can be 4 (four) SSID, where each SSID SSID can have a different disparate needs of our fit.
The next Advanced Wireless Settings, new facilities "Channel Bandwidth", in which we can again reduce the amount of its frequency spectrum from 5, 10, and the normal 20 MHz. this feature is also necessary for those who want to minimize the impact of interference, but we kekurangannya is Troughtput akan decreased. This feature was previously to be characteristic of the manufacturer and from Mikrotik Ubiquity. So even though we remain so acungkan a thumb Engenius can provide an alternative for users.
Other features in the "Management", there are additional menu "Diagnostics", which contains two new features of "Ping Test Parameters" and "Traceroute Test Parameters", which was quite helpful to us in evaluating kasil connection.
So with the new features fiur-over presumably be increased EOC 2610 class, though minus the new features, the EOC also has a surplus in 2610, among other advantages, he has facilities HTTP, telnet and SNMP management, Telnet with this feature you can access them through Linux prompt. Mode and then on the Access Points, you can monitor the client MAC Address that is connected with the quality of its RSSI. Excess is the other manufacturer Engenius has stock which is always awake, and we very rarely encountered vacuum Engenius products in stock over time, with different brand Mikrotik, Ubiquity and Finetic when empty stock may take up to many weeks, with 30 years experience to produce , Engenius able to maintain its safety stock.
No comments:
Post a Comment