How to use the Wireless Settings Speedy ISP or other
Make us have had the ISP itself does not need to subscribe to the hotspot via telkom, we live with our wireless settings are very easy once I'd like to do ....!
There are several ways of setting:
1. View our speech is wireless.
2. We buy any new wireless, cd drivers do not disappear until
3. Are We already have an ISP or not, if we have not yet subscribed to the ISP, bias telkom / Speedy is also another ISP.
4. We can also send out our wireless use any ISP.
5. When we have an example .. Speedy ISP, we could Transmission through normal network / cable and wireless computer with a capacity up to you, would mean little or a lot can be done, depending on your ISP quota.
Ok .. this case as an example, I bought a Linksys brand WAP5G wireles network and I have been using the ISP Speedy, I used to use a normal network cable connected to the terminals and computers ... and I want to be a terminal connected through kebel plus the fixed wireless I purchased a new Hotspot network to create their own .. that's how easy.
How:
1. Connect Wireless Power wireless and cable, connect to the Lan card is connected to a computer modem. When all was ready to connect to the wireless settings.
2. Note the led on the wireless, should in all circumstances of life.
3. Perform Reset wireless settings for the start.
4. Enter the CD driver wireless
5. When the CD and have run into the wireless setup checklist in the WAP content, and next, the contents of the hotspot with our name that we like, when the hotspot network dipasword .. we want to fill up our command Pharase, Pharase this hotspot network password to us, when we do not want to select a password to disable.
6. If already completed next, and yes to close the setup.
7. Check on the wireless network using a laptop computer or if already signed in or not our hotspot network and the internet we do not forget we are sharing the internet first when using a central server.
8. When using a server, wireless on the laptop we isiskan Add IP, subnet, gateway and DNS.
9. Connection will be automatically setup at the time if we do not fill the pharase / password, when we fill in when connected to the laptop will ask for your password.
10. If the Hotspot network is okay to install a wireless teminal on our cable networks, cable networks and automatic hotspot sure we are connected and we have two networks.
Make us have had the ISP itself does not need to subscribe to the hotspot via telkom, we live with our wireless settings are very easy once I'd like to do ....!
There are several ways of setting:
1. View our speech is wireless.
2. We buy any new wireless, cd drivers do not disappear until
3. Are We already have an ISP or not, if we have not yet subscribed to the ISP, bias telkom / Speedy is also another ISP.
4. We can also send out our wireless use any ISP.
5. When we have an example .. Speedy ISP, we could Transmission through normal network / cable and wireless computer with a capacity up to you, would mean little or a lot can be done, depending on your ISP quota.
Ok .. this case as an example, I bought a Linksys brand WAP5G wireles network and I have been using the ISP Speedy, I used to use a normal network cable connected to the terminals and computers ... and I want to be a terminal connected through kebel plus the fixed wireless I purchased a new Hotspot network to create their own .. that's how easy.
How:
1. Connect Wireless Power wireless and cable, connect to the Lan card is connected to a computer modem. When all was ready to connect to the wireless settings.
2. Note the led on the wireless, should in all circumstances of life.
3. Perform Reset wireless settings for the start.
4. Enter the CD driver wireless
5. When the CD and have run into the wireless setup checklist in the WAP content, and next, the contents of the hotspot with our name that we like, when the hotspot network dipasword .. we want to fill up our command Pharase, Pharase this hotspot network password to us, when we do not want to select a password to disable.
6. If already completed next, and yes to close the setup.
7. Check on the wireless network using a laptop computer or if already signed in or not our hotspot network and the internet we do not forget we are sharing the internet first when using a central server.
8. When using a server, wireless on the laptop we isiskan Add IP, subnet, gateway and DNS.
9. Connection will be automatically setup at the time if we do not fill the pharase / password, when we fill in when connected to the laptop will ask for your password.
10. If the Hotspot network is okay to install a wireless teminal on our cable networks, cable networks and automatic hotspot sure we are connected and we have two networks.
>>>>good luck<<<<
No comments:
Post a Comment