If your PC is no longer responding after start-up sounds other than beeps, he really wanted to show an error message. How to identify the most important signals from the BIOS? We regrouped beep sound was based on the type of bios is used:
AMI-BIOS
1x: RAM defective or not installed properly.
6x: Error Gate A20 - usually indicates a broken keyboard.
8x: Graphic card damaged or not installed correctly in the slot.
11x: Checksum-Error. Check the battery on the motherboard.
Award-BIOS
Long 1x: RAM Error, the module is not seated properly.
Long 1x, 2x short: Graphic defective or damaged card.
Long 1x, 3x short: Keyboard broken or not installed (from version 4.5 of this signal indicates an error graphics card).
Unbroken: RAM or graphics card is not found.
Phoenix-BIOS
1x-1x-4x: BIOS corrupted.
1x-2x-1x: Motherboard damaged.
1x-3x-1x: RAM problem, the module is not installed properly.
3x-1x-1x: Motherboard damaged.
3x-3x-4x: Graphic card damaged or not installed properly.
So, reply the next time your computer beep sounds, live match bios, and must have found out where the problematic part.
AMI-BIOS
1x: RAM defective or not installed properly.
6x: Error Gate A20 - usually indicates a broken keyboard.
8x: Graphic card damaged or not installed correctly in the slot.
11x: Checksum-Error. Check the battery on the motherboard.
Award-BIOS
Long 1x: RAM Error, the module is not seated properly.
Long 1x, 2x short: Graphic defective or damaged card.
Long 1x, 3x short: Keyboard broken or not installed (from version 4.5 of this signal indicates an error graphics card).
Unbroken: RAM or graphics card is not found.
Phoenix-BIOS
1x-1x-4x: BIOS corrupted.
1x-2x-1x: Motherboard damaged.
1x-3x-1x: RAM problem, the module is not installed properly.
3x-1x-1x: Motherboard damaged.
3x-3x-4x: Graphic card damaged or not installed properly.
So, reply the next time your computer beep sounds, live match bios, and must have found out where the problematic part.
No comments:
Post a Comment