MAKE A WIFI NETWORK

You can create a home network or small office without using the access point or hub / router. Like peerto-peer networks on the network using the NIC. Not only that, the network peer-to-peer with the Wi-Fi can be done with more than two computers and the speed that much greater.

1. Switch on your Wi-Fi
The first step is most important is the device your wireless network and activate it. How to enable Wi-Fi feature on each computer is quite diverse. There is a need to press the button and then on the new special. There was also a significant activate through your Windows screen. To activate the screen, open the Control Panel, Network Connection, the Wireless Network Connection icon right click and select Enable. Then, right click again and select View Available Wireless Network. If on the screen have a wireless connection available, you can press the button and then select Connect.

2. Create a Wi-Fi Network Self
However, when Wi-Fi connection is not available, you must create your own. Moreover, on the first computer to be used for the network. I just go to Control Panel, select Network Connection. NetworkConnection on the page and then select the Wireless Network Connection. Right click and select Properties. After that, open the Wireless Network page. On this page provide a check on the Use Windows to configure my wireless network settings. Then press the Add button at the preferred Networks.

3. Called Connection
The second step is to call the wireless connection that you want. Connection name can be given up, pengetikan the connections made in the SSID box. If you want to have the password for this network, the options The key is provided for me automatically remove the check mark. Then in the drop down menu Network Authentication, select Open or Shared for the network using WEP key or WPA-None chose to select a network using the WPA key. WPA is better, but not all devices support it. Then enter the key in the Network key and Confirm network key.

4. Give a WEP Password
If you choose to provide your password or key manually, then on the next screen is your akan password. When you use the password WEP (wired equivalent privacy) is the use of rules, that is only allowed 5 or 13 characters for the password that uses only 1 type of character. For two types of characters (letters and numbers) is only allowed as many as 10 or 26 characters. Please note that the long and complex password akan better.

5. Give WPA Password
You can also provide your password WPA (Wi-Fi Protected Access). On the use of WPA password rules must be obeyed is the number of characters that can be used between 8 to 63 for one of the characters and 64 characters for more than one type of character. Once completed later, you can print the password is then used to add computers to the network in the future. And reminded that the need to use WPA key can not always be implemented in any computer. There are some wireless network devices that can not accept the WPA key.

6. Ad Hoc
One needs to do is make the Ad Hoc network. Ad Hoc network is a network that only connects to the computer via the computer without a hub or router as access point. For wireless home network or small office network is using this type. Therefore, the one that should not be missed is to provide a check on the option This is a computer-to-computer (ad-hoc) network, wireless access points are not used. This option is located on the bottom screen Association. When done press OK.

7. Start Create New Network
Selajutnya step is to create a new network connection using an existing one. The first step in creating a network you can simply follow the wizard to create a common network. I go to Control Panel. Then select the Network Setup Wizard. Follow the instructions. At the time the wizard started running, you will be prompted to re-examine the network device to be used. What is complete or not. If you can already full resume. If you have not first make sure that all devices are mounted and installed properly.