There are two wireless devices, one type of wireless Access Point (AP) and a longer Wireless Cable / DSL Router. Both this device does not work long-optimal, direct sense of relief just curious to configure AP. Brand and model of wireless devices are not mentioned, because it can not be a vendor's fee and to allow exploitation become more easily by users who are illegally in the area around the office he .. he ..
Configuration is done on the first AP, a password, the default password has been changed, there is no need to ask konfigurator before, looking for ways to do factory reset to default settings on google.com, can some of the information from the forum / mailing list, after the AP tested the configuration back to initial setting.
Interface to set the settings made with the AP to enter the IP address of the device AP through the browser, some configuration is done, including with:
1. Set the AP that can act as a DHCP server
2. Try features wired equivalent privacy (WEP) and Wi-Fi Protected Access (WPA)
3. Manage access based on MAC Address device users
4. etc.
Some configuration is created does not work properly, for example, even though the DHCP server has been set, AP does not give IP in accordance with the allocation specified.
Upgade Firmware
Typically the device that have any kind of firmware upgrade will provide the AP firmware to do the repair, even with the firmware upgrade will be no new or additional functions. Simply search for the latest firmware on the AP website vendor. In fact there is some release of the firmware that is in the old AP, the firmware download the latest version. Firmware downloads in the form of executable file, run the file will decompress and do the README file and the firmware update.
The process of upgrading can be done easily, which is done directly through a browser, enter the firmware update file, then click sumbit, in less than a minute and completed the process of upgrading the new firmware directly connected. Reset to factory default settings according to the recommendations made in the Vendor file README.
Upgrade the firmware to provide a very satisfactory result, the DHCP server to function properly and the availability of additional facilities / new wireless device that is now into its three types:
1. Access Point (the default)
2. Client Bridge Mode
3. Repeater Mode
AP Computer and Server
Currently, AP has been functioning well and properly, then there is the desire to set up a computer to be a server that will provide functionality for:
1. User management
2. Management access
3. Proxy and Firewall
4. Management authentifikasi
5. Record log / history access
6. Provide billing features
Will readers have to do / install integrated open source applications for Linux, such as the need for this? if any, awaited commentary.
Configuration is done on the first AP, a password, the default password has been changed, there is no need to ask konfigurator before, looking for ways to do factory reset to default settings on google.com, can some of the information from the forum / mailing list, after the AP tested the configuration back to initial setting.
Interface to set the settings made with the AP to enter the IP address of the device AP through the browser, some configuration is done, including with:
1. Set the AP that can act as a DHCP server
2. Try features wired equivalent privacy (WEP) and Wi-Fi Protected Access (WPA)
3. Manage access based on MAC Address device users
4. etc.
Some configuration is created does not work properly, for example, even though the DHCP server has been set, AP does not give IP in accordance with the allocation specified.
Upgade Firmware
Typically the device that have any kind of firmware upgrade will provide the AP firmware to do the repair, even with the firmware upgrade will be no new or additional functions. Simply search for the latest firmware on the AP website vendor. In fact there is some release of the firmware that is in the old AP, the firmware download the latest version. Firmware downloads in the form of executable file, run the file will decompress and do the README file and the firmware update.
The process of upgrading can be done easily, which is done directly through a browser, enter the firmware update file, then click sumbit, in less than a minute and completed the process of upgrading the new firmware directly connected. Reset to factory default settings according to the recommendations made in the Vendor file README.
Upgrade the firmware to provide a very satisfactory result, the DHCP server to function properly and the availability of additional facilities / new wireless device that is now into its three types:
1. Access Point (the default)
2. Client Bridge Mode
3. Repeater Mode
AP Computer and Server
Currently, AP has been functioning well and properly, then there is the desire to set up a computer to be a server that will provide functionality for:
1. User management
2. Management access
3. Proxy and Firewall
4. Management authentifikasi
5. Record log / history access
6. Provide billing features
Will readers have to do / install integrated open source applications for Linux, such as the need for this? if any, awaited commentary.
No comments:
Post a Comment